chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Axle Shaft Assembly > < Rear Axle Shaft Seal and/or Bearing Replacement (8.6 Inch Axle W/O JL4, 9.5 Inch Axle)|Page 12954

K 1500 Suburban 4WD V8-5.3L VIN Z Flex Fuel (2003)

Page 7
background image

12. Install the wheel hub to the axle housing.

13. Install the adjusting nut to the hub using the J2222-C.
14. Adjust the wheel bearings. 
15. Install the axle shaft.
16. Install the brake caliper.
17. Install the tire and wheel assembly. 
18. Inspect and add axle lubricant to the axle housing, if necessary.
19. Lower the vehicle.

Axle Shaft Assembly > < Rear Axle Shaft Seal and/or Bearing Replacement (8.6 Inch Axle W/O JL4, 9.5 Inch Axle)|Page 12954