chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Engine/Transmission - Flexplate/Flywheel Replacement|Page 13141 > < Universal Joint Replacement - Nylon Injected Ring|Page 13136
Page 1
background image

Flex Plate: Technical Service Bulletins
Engine/Transmission - Flexplate/Flywheel Replacement

File In Section: 06 - Engine/Propulsion System 

Bulletin No.: 03-06-01-003

Date: February, 2003

INFORMATION

Subject:
Flywheel/Flexplate Replacement

Models:
2003 Passenger Cars and Light Trucks

When replacing the starter for any reason, the flywheel/flexplate should be inspected before replacement. The flywheel/flexplate should be turned a full
360 degrees and inspected for missing or broken teeth or signs of starter milling on the sides of the teeth before replacement.

No flywheel/flexplate should be replaced without a visual defect.

The majority of flywheel/flexplates returned to GM after replacement under warranty show no signs of damage or defect.

Disclaimer

Engine/Transmission - Flexplate/Flywheel Replacement|Page 13141 > < Universal Joint Replacement - Nylon Injected Ring|Page 13136