K 1500 Suburban 4WD V8-5.3L VIN Z Flex Fuel (2003)
1. Install the J43484 (2) to the J8092 (1).
2. Install the seal onto the J43484.
3. Using the J43484 (2) and the J8092 (1), install the seal.
4. Install the front propeller shaft.
5. Check the fluid level. Add fluid if necessary.
6. Install the transfer case shield, if equipped.
Transfer Case Output Shaft Seal Replacement - Rear
Transfer Case Output Shaft Seal Replacement - Rear
Tools Required
^
J37668-A Seal Installer
^
J45380 Transfer Case Rear Bushing Remover and Installer
Removal Procedure
1. Remove the transfer case shield, if equipped.
2. Remove the rear propeller shaft.
3. Remove the rear output shaft seal.