K 1500 Suburban 4WD V8-5.3L VIN Z Flex Fuel (2003)
1. Using GM P/N 12346001 (Canadian P/N 10951643) or equivalent to repair the grid lines.
Apply the grid line repair (2) decal or 2 strips of the tape above and below the repair area.
2. Use the brush (3) in order to spread the grid line repair material (1). Ensure that the repair material covers all of the areas of the cut out.
3. Without disturbing the grid line repair material, carefully remove the decal or tape (2).
NOTE: The grid line repair material must be cured with heat. To avoid heat damage to the interior trim, protect the trim near the repair area where
heat is to be applied.
4. Use a heat gun in order to repair the grid line:
-
Hold the heat gun nozzle 25 mm (1 in) from the surface.
-
Heat the repair area for 2-3 minutes.
IMPORTANT: Use J 25070 capable of 260°C (500°F) or equivalent. If you do not use a heat gun, allow at least 24 hours at an ambient temperature
of 21-32°C (70-90°F) for complete curing of the repair materials. Do NOT physically disturb the repair area until after that time.
The grid line will be electrically operative immediately after the repair.
5. Connect the electrical connector
6. Test the grid line operation in order to verify the grid line repair.
