K 1500 Suburban 4WD V8-6.5L DSL Turbo VIN F (1999)
Rear Door Interior Handle: Service and Repair
Rear Side Door Inside Handle Replacement
REMOVAL PROCEDURE
TOOLS REQUIRED
J 34940 Rivet Gun
1. Remove the trim panel.
2. Remove the water deflector.
3. Remove the inside door handle assembly completing the following steps:
^
Drill out the rivet heads.
^
Slide forward the door handle.
4. Disconnect the inside handle control rod from the handle and lock lever assembly.
5. Disconnect the inside lock control rod from the handle and lock lever assembly.
INSTALLATION PROCEDURE
