K 1500 Suburban 4WD V8-6.5L DSL Turbo VIN F (1999)
Power Door Lock Actuator: Service and Repair
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the door trim panel. See: Doors, Hood and Trunk/Doors
3. Remove the door water deflector.
4. Remove the door lock actuator.
5. Disconnect the electrical connector.
Installation Procedure
1. Connect the electrical connector.
2. Install the door lock actuator.
3. Install the door water deflector.
4. Install the door trim panel.
5. Connect the negative battery cable.