K 1500 Suburban 4WD V8-6.5L DSL Turbo VIN F (1999)
6. Snap the retainer spring into the piston.
^
The pad retainer spring is already staked to the inboard shoe.
^
The pad must lay flat against the piston.
7. Install the outboard lining with the wear indicator at the leading edge of the pad during a front wheel rotation. The back of the pad must lay flat
against he caliper.
8. Install the caliper.
9. Pump the brakes until the brake pedal is firm before moving the vehicle. Check the fluid level in the master cylinder after pumping the brakes.
Brake Pads Replacement (Front Bendix)
LININGS
The use of GM brake lining material will help to maintain a balance between the front and the rear brake performance. In addition, the use of GM
brake lining material will provide the proper brake balance for the purposes of stopping distance and control over the full range of operating
conditions. The installation of any front or rear lining material with a performance different from that of the suggested GM replacement parts for this
vehicle may change the intended brake balance of this vehicle.
