K 1500 Suburban 4WD V8-6.5L DSL Turbo VIN F (1999)
Coolant Reservoir: Service and Repair
Coolant Recovery Reservoir Replacement
REMOVAL PROCEDURE
1. Drain the coolant from the coolant recovery reservoir.
2. Remove the coolant recovery hose (5) and clamp (4) from the reservoir.
3. Disconnect the overflow hose (2) and clamp (4).
4. Remove the recovery reservoir bolts (1).
5. Remove the coolant recovery reservoir (3) from the vehicle.
INSTALLATION PROCEDURE
1. Install the coolant recovery reservoir (3) to the vehicle.
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Install the bolts (1).
^
Tighten the bolts to 10 Nm (89 inch lbs.).
3. Connect the coolant overflow hose (2) and clamp (4) to the recovery reservoir.
4. Connect the coolant recovery hose (5) and clamp (4) to the reservoir.
5. Refill the coolant in the reservoir.
