K 1500 Suburban 4WD V8-6.5L DSL Turbo VIN F (1999)
22. Remove the camshaft spacer from the engine block.
IMPORTANT: When removing the camshaft from the engine block, use caution as not to damage the camshaft bearing.
23. Remove the camshaft assembly from the engine block.
INSTALLATION PROCEDURE
IMPORTANT: When a new camshaft is being installed, use caution when installing the camshaft. Always install new valve lifters, engine oil and oil
filter must be replacement at the same time.
1. Install the camshaft assembly to the engine block.
^
Coat the camshaft lobes with camshaft and valve Prelube GM P/N 1052365.
^
Lubricate the camshaft bearing journals with clean engine oil.
2. Install the spacer on the camshaft.