K 1500 Suburban 4WD V8-6.5L DSL Turbo VIN F (1999)
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Install the nuts to the exhaust pipe flange studs.
^
Tighten the nuts to 64 Nm (47 ft. lbs.).
3. Install a new U-bolt to the rear of the catalytic converter.
^
Tighten the nuts to 42 Nm (31 ft. lbs.). Install the clamp to the exhaust manifold pipe.
^
Tighten the nut to 12 Nm ( 106 inch lbs.).
4. .Check for clearance and alignment.
5. Lower the vehicle.
