K 1500 Suburban 4WD V8-6.5L DSL Turbo VIN F (1999)
Horn Switch: Service and Repair
Steering Wheel and Column - Standard
REMOVAL PROCEDURE
1. Disable the Supplemental Inflatable Restraint (SIR) system.
2. Remove the inflator module.
3. Remove the horn contact from the steering column.
4. Remove the four TORX head screws from the two contact plates.
5. Remove the two contact plates from the steering column.
INSTALLATION PROCEDURE
1. Install the two contact plates to the steering column.
2. Install the four TORX head screws in order to secure the two contact plates to the steering column.
3. Install the horn contact to the steering column.
4. Install the inflator module to the steering wheel.
5. Enable the SIR system.
