K 1500 Suburban 4WD V8-6.5L DSL Turbo VIN F (1999)
5. Disconnect the electrical connector from the assembly.
6. Identify the bulb in need of replacement.
-
The top bulb is a parking lamp.
-
The center bulb is a parking, brake, and turn indicator lamp.
-
The lower bulb is a backup lamp.
7. Pull the bulb straight out by the tabs on the base of the bulb in order to remove the bulb.
INSTALLATION PROCEDURE
1. Push the bulb straight into the lamp assembly in order to install the bulb.
2. Install the lamp base to the lens assembly with the 2 screws.
3. Connect the electrical connector.
4. Install the tail/turn signal lamp assembly to the vehicle with the 2 screws.
