chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Front Seat|Page 9253 > < Front Seat|Page 9251
Page 18
background image

7. Install the bolt through the anchor plate and washer into the door pillar weld nut.

Tighten
Tighten the bolt to 55 N.m (41 lb ft).

8. Install the cover over the door pillar anchor plate.

Extended Cab With 3RD Door

1. Install the buckle assembly to the floor panel.
2. Install the seat belt warning wire to the buckle assembly on the driver's side only.

Notice: Refer to Fastener Notice in Cautions and Notices.

Front Seat|Page 9253 > < Front Seat|Page 9251