chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Power and Ground Distribution|Diode > < Initial Inspection and Diagnostic Overview|Page 7643
Page 1
background image

Auxiliary Power Outlet: Service and Repair

12 Volt Power Supply Replacement

REMOVAL PROCEDURE

1. Remove the front cover.
2. Remove the power supply (3) from the instrument panel.
3. Disconnect the electrical connector (1).

INSTALLATION PROCEDURE

1. Connect the electrical connector (1).
2. Install the power supply (3) into the instrument panel.
3. Install the front cover.

Power and Ground Distribution|Diode > < Initial Inspection and Diagnostic Overview|Page 7643