chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Automatic Transmission - 4L60-E|Page 5724 > < Automatic Transmission - 4L60-E
Page 1
background image

Automatic Transmission Dipstick - Dipstick Tube: Service and Repair
Automatic Transmission - 4L80-E

Removal Procedure

1. Remove the oil level indicator from the oil level indicator tube.

2. For the gasoline engine, remove the stud securing the transmission fluid fill tube bracket to the transmission.

3. For the diesel engine, remove the transmission fluid fill tube bracket and ground wire to the transmission.
4. Raise the vehicle. Refer to Vehicle Lifting.
5. Remove any dirt from the transmission where the fluid fill tube enters the transmission case.
6. Remove the transmission fluid fill tube from the transmission. Pull the tube upward from the transmission.

Automatic Transmission - 4L60-E|Page 5724 > < Automatic Transmission - 4L60-E