K 1500 Suburban 4WD V8-6.5L DSL Turbo VIN F (1999)
Fluid - A/T: Service and Repair
Automatic Transmission - 4L80-E
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Place a drain pan under the transmission oil pan.
3. Remove the oil pan drain plug.
4. Remove the oil pan bolts.
5. Remove the oil pan.
6. Remove the gasket.
7. Remove the magnet.
8. Remove the oil filter.
9. Remove the filter neck seal.
10. The transmission oil pan gasket is reusable. Inspect the gasket and replace as needed.
11. Clean the transmission case and the oil pan gasket surfaces with solvent.
Installation Procedure
