K 1500 Suburban 4WD V8-6.5L DSL Turbo VIN F (1999)
6. Push the white lock button on the range select lever cable end out. This will free the metal core adjust body which is inside the cable end. Do not
push the white lock button completely out.
7. Inspect the metal core adjust body on the cable end for dirt or debris that may restrict the travel. Remove any debris by washing the cable end, the
metal core adjust body, and the white lock button with soap and water. If the travel of the metal core adjust body remains restricted after the
cleaning, replace the cable assembly.
8. Lower the vehicle.
9. Ensure that the parking brake is applied.
10. Turn ON the ignition switch.
11. Move the transmission shift lever from PARK (P) to 1 and back to PARK (P) ten times.
12. Place the steering column transmission shift lever in the Park (P) position.
13. Turn the ignition switch to the OFF position.
14. Raise the vehicle. Refer to Vehicle Lifting.
