K 1500 Suburban 4WD V8-6.5L DSL Turbo VIN F (1999)
15. Position the transmission range select lever to PARK (P). Rotate the range select lever clockwise until it reaches the mechanical stop position.
16. Push in the white lock button in order to secure the core adjuster body inside the range select lever cable end.
17. Slide the black retainer clip rearward over the cable end until it covers the white lock button. Lock the clip over the cable end.
18. Lower the vehicle.
19. Turn ON the ignition switch.
20. Ensure that all the transmission shift light positions (P. R. N. D, 3, 2, 1) engaged and illuminate. If you cannot perform this task, repeat the cable
adjustment procedures.
21. Ensure that the engine starts in PARK (P) and in NEUTRAL (N) positions only. If the engine does not start in PARK (P) and in NEUTRAL (N),
the Park/Neutral Position Switch may need adjustment.
22. Turn the ignition switch to LOCK.
23. Ensure that the ignition key can only be removed with the transmission shift lever in the PARK (P) position.
24. Start the engine and check the vehicle transmission shifting. The range select lever cable is properly adjusted if the steering column shift light
positions are the same as the transmission engagements.
