K 1500 Suburban 4WD V8-6.5L DSL Turbo VIN F (1999)
10.5.
Align the tripot boot (1), with the swage ring (2) in place, over the flat area on the tripot housing (1).
11. Mount J 36652 in a vise.
12. Install the bottom half of the split-plate swage clamp. For K10 models, use J36652.
13. For K20/K30 models, use J 36652.
14. Check the inboard stroke position.
^
Use measurement A for the K10 models.
^
Use measurement B for the K20 and K30 models.
15. Position the inboard end (tripot end) of the halfshaft assembly in J 36652.
16. Install the top half of the proper size tool on the lower half of the tool. For K10 models, use J 36652.
17. For K20/K30 models, use J 36652.
18. Align the swage ring (2) and the swage ring clamp. Insert the bolts.
