K 1500 Suburban 4WD V8-6.5L DSL Turbo VIN F (1999)
6. Mark the main drive gear bearing retainer and case for alignment.
7. Remove four bolts securing the main drive gear bearing retainer.
8. Remove the main drive gear bearing retainer.
9. Remove the seal from the main drive gear bearing retainer.
Installation Procedure
^
Tools Required
-
J 38807 Rear Drive Gear Bearing Retainer Seal Installer
-
J 39314 Vibration Damper installer
-
J 38805 Main Shaft Nut Socket
1. Install the seal into the main drive gear bearing retainer using J 38807.
