K 1500 Suburban 4WD V8-6.5L DSL Turbo VIN F (1999)
Four Wheel Drive Selector Switch: Service and Repair
Transfer Case - NVG 243-NP1 (Two Speed Selectable)
Transfer Case Driver Control Switch Replacement (Selectable 4WD)
Removal Procedure
1. Remove the shift select switch from the instrument panel.
^
Pull the tabs on the rear of the switch in.
^
Pull the switch straight out from the panel.
2. Remove the electrical connector from the shift select switch.
Installation Procedure
1. Install the electrical connector to the shift select switch.
2. Install the shift select switch into the instrument panel. Ensure the shift select switch locks into the instrument panel.
