K 1500 Suburban 4WD V8-6.5L DSL Turbo VIN F (1999)
Shift Cable: Service and Repair
Transfer Case - NVG 241-NP2 (Two Speed Manual)
Removal Procedure
1. Place the shift lever in the 4HI position.
2. Raise the vehicle. Refer to Vehicle Lifting.
3. Remove the linkage rod from the console shift lever.
4. Remove the linkage rod from the transfer case shift lever.
Installation Procedure
1. Install the linkage rod to the transfer case shift lever.
2. Adjust the swivel in order to align the linkage rod end with the notch in the console shift lever.
3. Connect the linkage rod to the console shift lever.
4. Lower the vehicle.
