K 1500 Truck 4WD V6-262 4.3L (1991)
Removing The Poly-Groove Clutch Coil
3. Install Rotor and Bearing Puller Guide J 25031 to the front head and install J 25287 and remove the clutch coil from the front head.
Install or Connect
Tool Required:
J 26271-A Rotor and Bearing installer
1. Clutch coil (7) onto the neck of the front head (15). Position the coil terminals as marked during removal.
Installing The Rotor And Bearing (Poly-Groove Type)
2. Pulley rotor (5) and bearing (6) to the compressor with J 26271-A.
Important
-
Before seating the assembly, position the clutch coil terminals in the proper location to the compressor.
-
Align the three protrusions on the rear of the clutch coil housing with the locator holes in the front head.
