K 1500 Truck 4WD V6-262 4.3L (1991)
Dealers are to service all vehicles subject to this campaign at no charge to owners, regardless of mileage, age of vehicle, or ownership, from this time
forward.
Whenever a vehicle subject to this campaign is taken into your new or used vehicle inventory, or it is in your dealership for service in the future, you
should take the steps necessary to be sure the campaign correction has been made before reselling or releasing the vehicle.
Owners of vehicles recently sold from your new vehicle inventory are to be contacted by the dealer, and arrangements made to make the required
correction according to instructions contained in this bulletin.
PARTS INFORMATION
Parts required to complete this campaign are to be obtained from General Motors Service Parts Operations (GMSPO). To ensure these parts will be
obtained as soon as possible, they should be ordered from GMSPO on a "C.I.O." order with no special instruction code, but on an advise code (2).
Quantity/
Part Number
Description
Vehicle
17112679
Throttle Position Sensor (TPS) Kit
1
Service Procedure, ID Label, & Claim Information
SERVICE PROCEDURE
1. Remove air cleaner (if necessary).
2. Inspect vehicle's TPS for yellow dot. If the TPS has a yellow dot at the connector area, skip to step 4 below.
3. If the TPS does not have a yellow dot, replace the TPS with the new TPS kit per the Fuel And Emissions Section of the appropriate service
manual.
4. Install Campaign Identification Label.
CAMPAIGN IDENTIFICATION LABEL
Each vehicle corrected in accordance with the instructions outlined in this bulletin will require a "Campaign Identification Label". Each label provides a
space to include the five (5) digit dealer code of the dealer performing the campaign service. This information may be inserted with a typewriter or a ball
point pen.
Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for
periodic servicing by the owner.
Apply "Campaign Identification Label" only on a clean, dry surface.
CLAIM INFORMATION
Submit a Product Campaign Claim with the information indicated:
*
FAILED
PARTS
CC-FC
LABOR
LAB
OTH
REPAIR PERFORMED
PC
PART NO.
ALLOW
OP
HRS
HRS
Inspect - TPS Does
Not Need Replacement
-
- -
- -
SK-00
V6832
0.2
0.1
-
C/K & R/V
Inspect - TPS Does