K 1500 Truck 4WD V6-262 4.3L (1991)
Power Steering Pump: Service and Repair
Power Steering Pump Replacement
POWER STEERING PUMP REPLACEMENT
TOOL REQUIRED:
-
J 29785-A Puller
-
J 25033-B Pulley Installer
REMOVE OR DISCONNECT
-
Place a drain pan below the pump.
1. Hoses. Cap the hoses.
2. Loosen the tensioner assembly.
3. Belt.
4. Pulley (35).
-
Install J 29785-A. Be sure the pilot bolt bottoms in the pump shaft by turning the nut to the top of the pilot bolt.
-
Hold the pilot bolt.
-
Turn the nut counterclockwise.
5. Front mounting bolts (36).
6. Pump (33).
INSTALL OR CONNECT
1. Pump (33).
2. Mounting bolts (36).
TIGHTEN
-
Bolts to 50 Nm (37 lbs. ft.).
3. Pulley
-
Place pulley on the end of the pump shaft.
-
Install J 25033-B. Be sure the pilot bolt bottoms in the shaft by turning the nut to the top of the pilot bolt.
-
Hold the pilot bolt.
-
Turn the nut clockwise.
4. Belt.
6. Hoses.
-
Fill and bleed the system.