K 1500 Truck 4WD V6-262 4.3L (1991)
6. Switch actuator pivot pin (22) to switch (23) and cover (19).
7. Pivot & (pulse) switch wire harness through steering column.
^
Switch connector to vehicle wire harness.
^
Wire protector shield (36).
8. Dimmer switch rod actuator (21) to base plate (25).
^
Lubricate with lithium grease.
9. Base plate (25) to lock housing cover assembly (19).
^
Bottom edge of dimmer switch rod actuator (24) should rest on bend in dimmer switch rod (77).
10. Lock housing cover assembly (19).
11. Screws (15). Tighten screw in 12 o'clock position first, screw in 8 o'clock position second, and screw in 3 o'clock position third.
TIGHTEN
^
Tighten screws (15) in same order to 9.0 Nm (80 lb.in.).
12. Install multi-function lever.
13. Housing cover end cap (26).
14. Do all steps, "INSTALL OR CONNECT",for "UPPER COLUMN".
