K 1500 Truck 4WD V6-262 4.3L VIN Z (1993)
Fluid - Transfer Case: Service and Repair
REMOVE OR DISCONNECT
-
Raise and support the vehicle.
-
Place a container under the drain plug to catch the oil.
1. Fill plug.
2. Drain plug. Allow the oil to drain.
INSTALL OR CONNECT
1. Drain plug.
-
Tighten:
-
Drain plugs to 25 Nm (18 ft. lbs.).
2. Transfer case oil.
-
Fill the transfer case until the oil level is at the bottom of the oil fill plug hole.
3. Fill plug.
-
Tighten:
-
Fill plugs to 25 Nm (18 ft. lbs.).
4. Lower the vehicle.