chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Recall 97V176000: Seat Mount Inspection|Page 9786 > < Recall 97V176000: Seat Mount Inspection|Page 9784
Page 1
background image

Brake Shoe: Service and Repair

GM replacement brake lining material is recommended for all vehicles to maintain the balance between front and rear brake performance. GM
replacement brake parts have been carefully selected to provide the proper brake balance for the purposes of stopping distance and control over the full
range of operating conditions. Installation of front or rear lining material with performance different from that of recommended GM replacement parts
can change the intended brake balance of this vehicle.

Remove or Disconnect

Leading/Trailing Drum Brake

1. Raise vehicle and support with safety stands.
2. Mark relationship of wheel to hub.
3. Tire and wheel.   
4. Mark relationship of drum to axle.
5. Drum.

Pulling The Parking Brake Lever Off It's Stop

NOTE:  If the drum is difficult to remove, make sure the parking brake is released. If so, back off the parking brake cable adjustment as follows:

Recall 97V176000: Seat Mount Inspection|Page 9786 > < Recall 97V176000: Seat Mount Inspection|Page 9784