K 1500 Truck 4WD V6-4.3L VIN W (1997)
2. Bolts (B) and nuts (A) to the ball joint. Tighten (A) to 23 Nm (17 ft. lbs.) for K1-K2, and to 70 Nm (52 ft. lbs.) for K3.
3. Ball joint (115) to the knuckle (117).
4. Nut.
^
Tighten
-
Nut-to 100 Nm (74 ft. lbs.).
-
Nut must be tightened with the control arm at "Z" Height.
-
Tighten the nut to align the cotter pin. Do not tighten more than 1/6 turn.
5. New pin.
-
Bend the pin ends against the nut.
6. Tire and wheel assembly.
-
Lower the vehicle.
-
Check front wheel alignment.
