K 1500 Truck 4WD V6-4.3L VIN W (1997)
3. 1-2 accumulator piston seal onto the 1-2 accumulator piston.
4. 1-2 accumulator piston into the 1-2 accumulator cover and pin assembly.
-
The three legs on the piston must face toward the case when installed.
5. 1-2 accumulator spring on the piston.
6. 1-2 accumulator cover, bolts, and the pin assembly onto the case.
-
Tighten bolts to 11 Nm (97 inch lbs.).
7. New filter and gasket, pan bolts and new oil.
8. Lower the vehicle.
9. Negative battery cable.
-
New transmission oil.
