K 1500 Truck 4WD V8-4.8L VIN V (2003)
seconds, the Tech 2 will continue to display "Test in Progress" and the program will not complete.
^
Remove the PDM fuse for 5 seconds from the fuse center located behind the panel on the left end of the instrument panel.
^
Reinstall the fuse and fuse panel cover.
^
Press the "Enter" button to perform the "Refresh" function.
^
"Test In Progress" will be displayed and the right front passenger door lock will cycle once.
^
The screen will display "Procedure Completed".
^
Press the "Exit" button as necessary to return to the main menu screen.
3.
Using the switches in the right front passenger door, verify that the power window and power door lock located in that door, function properly.
Important
The calibrations required for performing SPS reprogram in the next step are based on the type of exterior rearview mirror that the vehicle has.
To determine the correct calibration, check the Service Parts Identification Label on the vehicle for the RPO code for the exterior mirrors.
4.
Follow normal Service Programming System (SPS) to reprogram the Passenger Door Module with the new calibration.
5.
After reprogramming is complete, using the switches in the right front passenger door, verify that the power window and power door lock
located in that door, function properly.
6.
Install the GM Recall Identification Label.
IDENTIFICATION LABEL - For US and IPC
Place an Identification Label on each vehicle corrected in accordance with the instructions outlined in this Product Program Bulletin. Each label provides
a space to include the program number and the five (5) digit dealer code of the dealer performing the program service. This information may be inserted
with a typewriter or a ballpoint pen.
Put the Identification Label on a clean and dry surface of the radiator core support in an area that will be visible to people servicing the vehicle.
When installing the Identification Label, be sure to pull the tab to allow adhesion of the clear protective covering. Additional Identification Labels for
US dealers can be obtained from Dealer Support Materials by either ordering on the web from DWD Store, gm-dealerworld.com, or calling
1-866-700-0001 (Monday-Friday, 8:00 a.m. to 5:00 p.m. EST). Request Item Number 8-1015 when ordering.
Additional Identification Labels for IPC dealers can be obtained from your Regional Marketing Office.
IDENTIFICATION LABEL - For CANADA
Place an Identification Label on each vehicle corrected in accordance with the instructions outlined in this Product Program Bulletin. Each label provides
a space to include the program number and the five (5) digit dealer code of the dealer performing the program service. This information may be inserted
with a typewriter or a ball point pen.
