K 1500 Truck 4WD V8-4.8L VIN V (2003)
8. For all 15 series vehicles, pull down on the park brake cable in front of the equalizer and install the left park brake cable to the equalizer bar.
9. Remove the safety stands.
10. Remove the safety stands and lower the vehicle.
11. Adjust the park brake cable. Refer to Park Brake Adjustment.
Right Rear - W/NYS
Park Brake Cable Replacement - Right Rear (w/NYS)
Removal Procedure
1. Release the park brake.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
3. Relieve the tension from the park brake cable by pulling down on the park brake cable in front of the equalizer and removing the right park brake
cable from the equalizer bar.
4. Remove the cable from the mounting bracket by depressing the locking tabs.
