chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Park Brake Cable Replacement|Page 13957 > < Park Brake Cable Replacement|Page 13955
Page 7
background image

6. Pull down on the park brake cable in front of the equalizer and install the left park brake cable to the equalizer bar.
7. Remove the safety stands.
8. Lower the vehicle.

Left Rear - W/O NYS

Park Brake Cable Replacement - Left Rear (w/o NYS)

Removal Procedure

1. Release the park brake.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

3. For all 15 series vehicles, relieve the tension from the park brake cable by pulling down on the park brake cable in front of the equalizer and

removing the left park brake cable from the equalizer bar.

4. For 25/35 series vehicles, disable the park brake cable automatic adjuster. Refer to Disabling the Park Brake Cable Automatic Adjuster.
5. For 25/35 series vehicles, disconnect the cable at the equalizer.

Park Brake Cable Replacement|Page 13957 > < Park Brake Cable Replacement|Page 13955