K 1500 Truck 4WD V8-4.8L VIN V (2003)
Idler Pulley: Service and Repair
Drive Belt Idler Pulley Replacement
Removal Procedure
1. Loosen the drive belt idler pulley bolt.
2. Remove the accessory drive belt.
3. Remove the drive belt idler pulley and bolt.
Installation Procedure
1. Install the drive belt idler pulley and bolt to the generator bracket. Snug the bolt finger tight.
2. Install the drive belt.
Notice:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
3. Tighten the drive belt idler pulley bolt.
Tighten the bolt to 50 Nm (37 ft. lbs.)
