K 1500 Truck 4WD V8-4.8L VIN V (2003)
8. Remove the exhaust heat shield (1, 2) from the studs.
9. If vehicle is a crew cab pick-up truck, remove the exhaust heat shield nuts.
10. Remove the exhaust heat shields from the studs
Installation Procedure
1. If vehicle is a crew cab pick-up truck, install the exhaust heat shields to the studs.
Notice:
Refer to Fastener Notice in Service and Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
2. Install the exhaust heat shield nuts.
Tighten the exhaust heat shield nuts to 9 Nm (80 inch lbs.).