K 1500 Truck 4WD V8-4.8L VIN V (2003)
6. If equipped with RPO NYS, install the harness ground clip to the PCM cover.
7. Connect the negative battery cable.
8. If a NEW PCM was installed, program the PCM.
See: Testing and Inspection/Programming and Relearning
9. Perform the crankshaft position (CKP) system variation learn procedure. Refer to CKP System Variation Learn Procedure.
See: Testing and Inspection/Programming and Relearning
10. If necessary, reset the engine oil life monitor. Refer to GM Oil Life System - Resetting. See Oil Change Reminder Lamp.
