chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Power Brake Booster Inlet Hose Replacement|Page 15789 > < Power Brake Booster Inlet Hose Replacement|Page 15787
Page 5
background image

7. Install the upper grille baffle.

With Hydroboost

POWER STEERING COOLER PIPE/HOSE REPLACEMENT (WITH HYDROBOOST)

REMOVAL PROCEDURE

1. Remove the front grille.

2. Place a drain pan under the vehicle.

NOTE:  Refer to Power Steering Hose Disconnected Notice in Service Precautions.

3. Siphon the fluid from the reservoir to prevent excess spillage.
4. Remove the clamp retaining the power steering cooler inlet hose (3) to the power steering gear (2).
5. Remove the clamp retaining power steering cooler outlet hose (5) to the power steering pump (1).

Power Brake Booster Inlet Hose Replacement|Page 15789 > < Power Brake Booster Inlet Hose Replacement|Page 15787