K 1500 Truck 4WD V8-4.8L VIN V (2003)
3. Install the lower control arm 25/35-series bolts.
4. Install the washers with the shoulder facing the arm.
5. Install the lower control arm retaining nuts.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the nuts to 150 N.m (110 lb ft).
6. Install the wheel drive shaft.
7. Connect lower ball joint stud to the steering knuckle.
8. Install the retaining nut to the lower ball joint stud.