K 1500 Truck 4WD V8-4.8L VIN V (2003)
Installation Procedure
1. Coat the NEW filter seal with automatic transmission fluid.
2. Install the NEW filter seal into the transmission case. Tap the seal into place using a suitable size socket.
3. Install the NEW filter
4. Install the oil pan and NEW gasket.
Notice: Refer to Fastener Notice in Service precautions.
5. Install the oil pan bolts.
^
Tighten the bolts alternately and evenly to 11 Nm (97 inch lbs.).
6. If previously removed, install the range selector cable bracket and bolts.
