K 1500 Truck 4WD V8-4.8L VIN V (2003)
8. Connect the internal wiring harness electrical connectors to the following components
^
Transmission fluid pressure switch (1)
^
1-2 shift control solenoid (2)
^
2-3 shift control solenoid (3)
^
Pressure control solenoid (4)
^
TCC PWM solenoid (5)
^
3-2 control solenoid (6)
9. Install the 1-2 accumulator.
10. Connect the transmission harness 20-way connector (1) to the transmission pass-through connector.
Align the arrows on each half of tile connector and insert straight down.
11. Install the transmission filter.