K 1500 Truck 4WD V8-5.3L VIN T (1999)
Fuse Block: Service and Repair
Fuse Block Replacement (Mid Bussed Electrical Center)
REMOVAL PROCEDURE
Caution: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Disconnect the negative battery cable(s).
2. Remove the harness from the front of the Mid Bussed Electrical Center (MBEC).
3. Unsnap the cover from the MBEC.
4. Unsnap the top pivots and rotate the MBEC (1) down. Unsnap the lower pivots and remove the MBEC from the bracket (2).
5. Disconnect the two 68 Way IP connectors.
INSTALLATION PROCEDURE
