K 1500 Truck 4WD V8-5.3L VIN T (1999)
Steering Damper: Service and Repair
REMOVAL PROCEDURE
-
Tools Required
-
J 6627-A Tie Rod Puller
-
J 29193 Steering Linkage Installer (12 mm)
1. Raise and support the vehicle on stands.
2. Remove the differential carrier shield.
3. Remove the steering damper ball stud nut (1). Do not reuse the nut.
IMPORTANT: Use the proper tool in order to separate the ball stud.
4. Remove the steering damper ball stud from the relay rod using the J 6627-A.
