K 1500 Truck 4WD V8-5.3L VIN T (1999)
1. Install the torsion bars.
2. Install the torsion bar crossmember.
3. Install the torsion bar crossmember bolts (1) to the weld nuts (4) (15 Series).
NOTICE: Refer to Fastener Notice in Service Precautions.
^
Tighten the bolt to 95 Nm (70 ft. lbs.).
4. Install the upper link mounting nuts (2) and the bolts (1) (25 Series).
^
Tighten the nut to 95 Nm (70 ft. lbs.).
5. While supporting the adjustment arm, slide the torsion bar rearward until the torsion bar fully engages the adjustment arm.