K 1500 Truck 4WD V8-5.3L VIN T (1999)
1. Install the 2-4 servo assembly into the 2-4 servo bore.
2. Install the J 29714-A
3. Tighten the bolt in order to compress the servo cover.
4. Install the servo cover retaining ring.
5. Remove the J 29714-A from the oil pan flange.
Notice: Refer to Fastener Notice in Service Precautions.
6. Install the oil pan bolt.
^
Tighten the oil pan bolt to 11 Nm (97 inch lbs.).
7. Lower the vehicle.
8. Check the automatic transmission fluid level. Refer to Fluid Capacity.