K 1500 Truck 4WD V8-5.7L VIN R (1997)
C. Align the timing ribs on the edge of the commutator end frame with the timing spots on the frame and field assembly to ensure proper
brush alignment. Marks are located in two places on the motor, but will only match one way.
Tighten
-
Through-bolts to 8.5 N.m (75 lb in).
Electrical Group
9. Motor lead onto the frame and field assembly.
-
Remove the nut from the terminal on the solenoid, install the motor lead terminal, and reinstall the nut.
Tighten
-
Solenoid motor terminal nut to 11 N.m (100 lb in).
Testing After Overhaul
After overhaul of the starter motor, perform the "Starter Draw Test".
Lubrication
Use GM PIN 1960954 Grease Lubricant or equivalent.
