K 1500 Truck 4WD V8-5.7L VIN R (1997)
1. Determine the toe-in from the alignment equipment.
2. Change the length of both tie rod sleeves to affect a toe-in change. Toe-in can be increased or decreased by changing the length of the tie rod ends.
A threaded sleeve is provided for this purpose. When the tie rod ends are mounted ahead of the steering knuckle they must be decreased in length
in order to increase toe-in. When the tie rod ends are mounted behind the steering knuckle they must be lengthened in order to increase toe-in.
Frame Bracket Knockout Replacement
^
Tool Required:
-
J 38794 Knockout Removal Tool, Or Equivalent
REMOVAL
NOTE:
-
Raise and support the vehicle.
-
Support the lower control arms with jack or jack stands.
