chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

On-Vehicle Service|Page 11177 > < Engine - Drive Belt Noise, P/S Pump Pulley Misaligned|Page 11174
Page 1
background image

Power Steering Pump: Service and Repair
On-Vehicle Service

^

Tools Required:
-

J 25034-B Power Steering Pump Pulley Remover

-

J 25033-B Power Steering Pump Pulley Installer

-

Or Equivalents

REMOVAL

NOTE:  Place a drain pan below the pump.

Remove or disconnect the following:
1. Hoses. Cap the hoses.
2. Unload the tensioner assembly.
3. Drive belt.
4. Pulley.

On-Vehicle Service|Page 11177 > < Engine - Drive Belt Noise, P/S Pump Pulley Misaligned|Page 11174