K 1500 Truck 4WD V8-5.7L VIN R (1997)
INSTALL OR CONNECT
1. Propeller shaft into the transmission.
-
Lubricate slip joint spline with chassis grease.
2. Align the reference marks on the pinion flange and the propeller shaft rear yoke.
3. Yoke and cross assembly onto the fixed yoke.
4. Retainers.
5. Bolts.
-
Tighten:
-
Bolt to 20 Nm (15 ft. lbs.).
Two-Piece Propeller Shaft
INSTALL OR CONNECT
1. Propeller shaft into the transmission.
-
Be sure the slip joint splines are lubricated.
-
Bottom the propeller shaft yoke in the transmission.
2. Center bearing support.
