K 1500 Truck 4WD V8-6.5L DSL Turbo VIN F (1999)
7. Remove the mounting bolts (1), (2).
8. Remove the bolt boots (1), (2).
9. Remove the caliper.
^
Inspect the inside of the caliper assembly for signs of fluid leakage.
^
Remove the mounting bolt seals if the were used.
10. Remove the bushings.
11. Inspect the mounting bolt and the sleeve assemblies for corrosion. Replace any corroded parts. Do not attempt to polish away any corrosion.
IMPORTANT: Clean the caliper assembly and install a new brake hardware kit. Replace the brake hardware kit with each removal from the
rotor.
12. Inspect the bolt boots for any nicks, cuts, or corrosion. Replace any damaged parts.
