K 1500 Truck 4WD V8-6.5L DSL Turbo VIN F (1999)
9. If servicing a 4 wheel drive vehicle, remove the engine mount assembly bolts, nuts, and washers.
10. Remove the engine mount assembly.
INSTALLATION PROCEDURE
1. If servicing a 2 wheel drive vehicle, install the engine mount assembly.
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Install the engine mount assembly bolts, nuts, and washers to the crossmember.
^
Tighten the bolts to 59 Nm (44 ft. lbs.).
^
Tighten the nuts to 45 Nm (33 ft. lbs.).
3. If servicing a 4 wheel drive vehicle, install the engine mount assembly.
4. Install the engine mount nuts, bolts, and washers to the crossmember.
^
Tighten the bolts to 59 Nm (44 ft. lbs.).
^
Tighten the nuts to 45 Nm (33 ft. lbs.).
5. Remove the pole jack from the engine block.
